THE TOMBSTONE V2
THE TOMBSTONE V2
Couldn't load pickup availability
The Tombstone has gone through some major changes for this season. Moving more toward a downhill oriented ride we have generally mellowed things out to keep the platform simple and easily modifiable. Front loaded rocker combine with mellow flares up front keep your front foot locked in while the concave in the rear is a mellow tub making it easy to apply a torque block and other mods. We have removed the rear W concave to also allow for a specified modification if you like W or to keep the platform plain if you don’t. Grab a Tombstone V2, some narrow trucks, and big wheels and get out in the mountains!
Collapsible content
SPECS
Length: 30.125”(76.52cm)
Width at Belly: 8.75”(22.23cm)
Width at Trucks: 8.5”(21.59cm)
Wheelbase: 20-21”(50.8-53.34cm)
CONSTRUCTION
The Tombstone is crafted out of 8 plies of hard rock Great Lakes Maple and two layers of Custom 13.8 ounce Triaxial Carbon Fiber.
ABOUT FOSTER BOARDS
MATERIALS
All of the materials we put into our boards are aimed at being as sustainable as possible.
-The Wood is sourced from a sustainable mill
-The Glue used in our boards is a water based PVA glue for lowest environmental impact
-The Resin used is 29% bio based resin called SuperSap by Entropy Resins
-Basalt and Fiberglass are consider the most sustainable of all reinforcement fabrics. Basalt Fabric is made from Basalt or more commonly know as lava rock. Fiberglass is mainly made from sand something that is very abundant.
-The Inks used in our graphics are water based acrylic inks, significantly less toxic for the environment than the oil based inks used by most in the industry
-The Lacquer used to seal our boards is a waterborne lacquer with extremely low VOC content which leads to less impact on the environment.
GRAPHICS
All of our graphics are hand screen printed in our shop in Seattle, WA.
They are printed using high quality water based inks. Because they are screen printed by hand, slight variations might be present in each board.
All Graphics are created by Gerry Kreuder with a collaboration of ideas from the team.
PROCESS
All of our boards are made from start to finish in our shop in Seattle, WA.
We have strict quality control rules in place throughout the process to insure each and every board that leaves our shop is of the highest quality.
Our CNC machine and programming is able to process material with accuracy better than .001” which guarantees 100 percent accurate boards and specs every time.