THE BIGGIE Q
THE BIGGIE Q
Couldn't load pickup availability
You asked, we listened. Finally releasing the new version of our big double kick, the Biggie Q. Updated kicktail geometry specifically for RKP trucks make this deck optimal for technical freeride blended with some pop. The concave is a mellow tub concave paired with flares in the pockets and rocker over the length for a comfortable lock in during slides. The Biggie Q is the board you need if you’re looking to skate everything!
Collapsible content
SPECS
Length: 39.25”(99.7cm)
Width: 9.35”(23.75cm)
Wheelbase: 20.5”-21.5”(52.07-54.61cm)
CONSTRUCTION
The Biggie Q is crafted out of 7 plies of hard rock Great Lakes Maple and one layer of 9 ounce Triaxial Carbon Fiber and one layer of 13.8 custom Triaxial Carbon Fiber.
ABOUT FOSTER BOARDS
MATERIALS
All of the materials we put into our boards are aimed at being as sustainable as possible.
-The Wood is sourced from a sustainable mill
-The Glue used in our boards is a water based PVA glue for lowest environmental impact
-The Resin used is 29% bio based resin called SuperSap by Entropy Resins
-Basalt and Fiberglass are consider the most sustainable of all reinforcement fabrics. Basalt Fabric is made from Basalt or more commonly know as lava rock. Fiberglass is mainly made from sand something that is very abundant.
-The Inks used in our graphics are water based acrylic inks, significantly less toxic for the environment than the oil based inks used by most in the industry
-The Lacquer used to seal our boards is a waterborne lacquer with extremely low VOC content which leads to less impact on the environment.
GRAPHICS
All of our graphics are hand screen printed in our shop in Seattle, WA.
They are printed using high quality water based inks. Because they are screen printed by hand, slight variations might be present in each board.
All Graphics are created by Gerry Kreuder with a collaboration of ideas from the team.
PROCESS
All of our boards are made from start to finish in our shop in Seattle, WA.
We have strict quality control rules in place throughout the process to insure each and every board that leaves our shop is of the highest quality.
Our CNC machine and programming is able to process material with accuracy better than .001” which guarantees 100 percent accurate boards and specs every time.